Love this case! Fantastic build quality, beautiful design, an absolute pleasure to work with. By far the best looking and feeling Mini ITX case on the market. The one drawback of this case is that the 3080 FE (specifically the FE) causes pretty serious thermal issues as there is no space in between the GPU’s exhaust and the PSU/Mobo. That being said, the build quality and design of the case outweighs these issues and I’ve seen better results after adding an extra fan and replacing the PSU bracket with one that allows a pocket in between the PSU and 3080 FE’s exhaust fan. Overall I would absolutely recommend this case, just be ready to tinker if you have a 3080 FE.
The case looks great! The main draw is obvious the unique design and tiny foot print. Quality of the aluminum panels are very good, the painted finish is generally good, but there are some inner edges where it's uneven. Thankfully those are not in very visible places. Clearances are tight as expected in typical ITX sandwich case, but I didn't have too much issues putting the system together otherwise. Airflow is good and the system is kept quiet and cool even at load. Ideal air flow setup is to have CPU cooler fan set to intake fresh air from side panel, and have the two top case fans set to exhaust. Some of the issues I ran into that potential buyers might want to be aware of: -The included mobo screws just didn't work with securing the mobo to the standoffs as they are too long. But the included extra short screws worked fine once I added in some washers. -The riser cable is PCIE gen 3. If you have a newer PCIE gen 4 graphics card, you need to set it in bios as gen 3 speed, otherwise it won't post. Hopefully, this is something Iqunix can provide in the future.
Still waiting on my motherboard so I can finish this build. But I'm extremely pleased with the aesthetic of this case so far. I look forward to installing the rest of my components.
ji hong k.
well it is always hard to builing sff case this case is really good at more little bit bigger than other a4 size case with water cooling that's why i choose this anyway if you consider more space for next gen gpu just choose this
Packaging is great! Easy to build with. Instructions manual is easy to follow. I just wish the screws were all Phillip screws. Other than that, it's perfect!
Great space optimized case design. Unmatched simplicity and beauty. Much better thermal performance than expected. Thoroughly impressed down to the tiniest detail. The fit and finish are also incredible. I've never seen a case that was machined to this level of precision, not even close.
Great case! Had some trouble getting it together and the panels on the side don’t quite fit flush but it’s super well made and I am really glad I got one!
Being my first ITX build it was challenging and very rewarding. Beautiful case, great finish. Delivery was fast. Only caveat is the three different screw types but a screw driver with multiple heads is provided. In short I love it.
Bought it and received it in about two weeks in the US. The finish is almost perfect, fitting components was slightly hard, but I managed. The GPU clearance of 45 mm is kinda weird as my Sapphire Pulse 5700XT (48 mm wide) would easily fit inside if not for one piece in the corner of the case that is just there to be a continuation of a screw post. Had to sand my card a bit down. Otherwise, great looking case.
Really solid case! The unibody makes it worth the price and the paint finish is beyond beautiful. The manual has some things sorta wrong, like the recommended motherboard screws doesn’t secure it to the chassis, you’d need to use the black hex screws instead. Other than that, the case always leaves a smile on my face when I see it. At $219USD, it’s priced competitively against the NCase M1 in which this provides a good alternative if you favor a more minimal and streamlined design. Love it!
It is a bit on the pricey side but it is a very good case. Overall I am satisfied with this one. One improvement point is to standardize the screw for the case, as right now you will need to change the screwdrivers multiple times while building. Keep up the good work, Iqunix!
This case is very well machined. Clearances are near perfect. The overall simplicity of this case is amazing and beautiful. Perfect for my iTX hackintosh. I first thought the case was anodized however it is painted. This does not matter though since the finish is great. As for cons, there is not a lot of room for cables from the PSU. Especially no where close to enough room for a 3rd fan or an extra ssd. I had a bit of issues fitting my 8/6pin GPU chords to where they didn’t hit the fan. However I ordered some 180 degree adapters and they work well. I wish there was just a bit more room. However, the PSU having two option height positions was VERY helpful. Last con would be the lack of built in ways to remove the side or top panels. They can be VERY difficult to remove and I think a small lip on the back of the side panels would be a great addition so it is easier to remove. I technically have a “defect” in the way my side panel was made (one side of my panel does not fit flush), however this allows for me to pry it open and get access to the inside. Overall a very well designed case and well worth the price.
A challenge to build in but highly rewarding in terms of looks!
Arrived on time, very good instructions, simple building, good fit and finish, very happy with it. Feels super high quality and well built. 2 fans on top and my temps are awesome. (80 ish gaming)
A beautiful case! Clear instructions and easy to assemble. I highly recommend!
The quality is as good as the price. It's a small size, but you can even use 3080 FTW3. But Hex screw is uncomfortable to assemble and it is inconvenient because there is no handle on the panel.
Super sleek and sturdy!!